Intermediate restriction connectors
316L stainless steel connectors with a calibrated bore, fitted between two components of the dosing circuit of your packaging machines.
Fitted between two components of the dosing circuit, the intermediate restriction connector brings the product passage down to a calibrated diameter: from 0.5 mm to 1.6 mm on the models already produced.
Each connector is made of 316L stainless steel and electropolished. Its ends adapt to the circuit: M12 x 1 or M16 x 1 threads, nuts, silicone tubing ends.
The restriction diameter is marked on the connector body, so the part can be identified at assembly without measuring.
Like our manifolds, our connectors are made to drawing: restriction diameter, connections, lengths and surface finishes.
Benefits
- Calibrated bore, from 0.5 mm to 1.6 mm on the models produced
- Electropolished 316L stainless steel
- Restriction diameter marked on the body
- Made to measure, to suit the connections of your circuit
Technical specifications
- Material
- 316L stainless steel (X2CrNiMo17-12-2)
- Finish
- Electropolishing
- Product-contact roughness
- Ra ≤ 1.6 µm, down to Ra ≤ 0.5 µm depending on the model
- Bore diameter
- 0.5 mm · 0.6 mm · 1.6 mm (models produced) · Other on request
- Connections
- M12 x 1 or M16 x 1 threads · M16 x 1 nuts · Silicone tubing ends
Our expertise enables us to offer a complete solution.
From technical expertise of your installations to the design of your future production tools.
.svg?dpl=dpl_8T8xzCsfmDbKeqU4oGjxaNr6JLVq){kind=logo}
