Flow FU 24 avec radical engine
Dimension : 1360mmx680mmxH450mm to fix on the Maxys machine chassis
Vertical laminar flow structure iso 5 fully equipped with :
- 6 prefilters
- 1 dimension stainless steel
- 1 electric box in external stainless steel
Avantages
The laminar flow VFU with the following main characteristics :
- The unit is made of stainless steel AISI 304L with a finish " scotch brite " pharmaceutical
- HEPA H14 filters according the standard EN 1822 with an efficacy of 99.995 % for particles of 0.3 µ
- Easy access for filter replacement from below
- HEPA filter protection metal gate in anodized aluminum
- Prefilter G3 according to the standard EN 779 with a stainless metal gate
- Impoved plenum for a better air distribution with a very low noise level
- The design of negative pressure to prevent the risk of external air leak contaminated in periphery of the HEPA filter and reduce pressure losses transition ( removal/depression : dynamic impermeability )
- Emery plug for DHES integrity test of HEPA filters
- Additional electrical outlet 230V/50Hz single-phased
Construction
- Structure Entièrement AISI 304 acier inoxydable 1.5mm Structure entirely AISI 304 stainless steel 1.5mm
- Brite Internal and external finition scotch - brite
- Overall dimensions
- 1360 x680 X 450 mm ( L x l x h ) SPECIAL ou
- 2040 x680 X 450 mm ( L x l x h ) SPECIAL
- Output m3/h
- 1205 m3/h @ 0,40m/s FU24
- 602 m3/h @ 0,40m/s FU22
- Engine 1 total static pressure Pa: 560
- Control box 1 external in stainless steel
- Prefilter 6 or 7 prefilter G3
- Filter HEPA 1 or 2 filters HEPA H14 accoding to sthe standard CEN EN 1822 CLASSE ISO 5
- Tension 230V 50Hz single-phased or 380V tree-phase
- Weight Kg. 75 to 130Kg according to the version